BaseTwo25
BaseTwo25 is a powered low-frequency extension system with 2 x bass extension towers and 2 x 900W amplifer.
- Perfectly integrated time and phase-coherent, three-way system, extending all the way down to 20Hz.
- Extremely robust 25 cm (10”) woofers with matching 25 cm passive radiators mounted in back to back force canceling mode on both sides of the cabinet.
- Driven by 2 x 900W amplifiers housed in a 2U rack chassis and a stand-alone 1U filtering module with variable-volume control.
Description
Another step forward…
Modern music is increasingly bass-intensive. To pack the maximum amount of energy into the lowest octave – with no surprises in the playback – a sound engineer needs to hear and feel throughout the whole frequency spectrum.
BaseTwo25 low-frequency extension system fits equally well in any composing, mixing, or mastering setup, where correct reproduction and appreciation of the lowest octave is critical. Amphion’s innovative approach to low-frequency monitoring provides producers, sound engineers, and artists with a completely new perspective to the base.
The BaseTwo25 is a state-of-the-art monitoring solution converting any Amphion two-way studio monitor into a full-range, time and phase-coherent, three-way system. These full-range towers extend all the way down to 20Hz. Each BaseTwo25 has 2 x 25 cm woofers (top) and matching 2 x 25 cm radiators (below) mounted in back to back force-canceling mode on both sides of the cabinet. The system is driven by a 2 x 900W amplifier, and controlled by Amphion’s signature filtering module with a variable-level attenuator.
In addition to providing tight, tuneful bass, BaseTwo25 improves midrange clarity and increases the midrange power-handling abilities of the paired monitors. This is achieved by gradually transferring the low-end frequencies from the monitors to the base extenders.
Additional information
Operating principle | Two-way, passive radiators |
---|---|
Drivers | 1″ (25mm) titanium tweeter |
Weight | 6 kg (13 lbs) |
Crossover point | 1600 Hz |
Sensitivity | 84 dB @ 2.83V/1m |
Frequency response | 78 – 20.000 Hz ±3dB |
Power recommendation | 20 – 100 W |